How often must a crane be inspected?

Cranes require routine, periodic and major inspections under AS 2550, with intervals set by crane type and duty. Routine checks are frequent; major inspections are typically at 10 years.

What do crane inspectors check?

Inspection covers structural welds and members, the hook, sheaves and load path, pins, bushes and slew ring, wire ropes and rigging, and safety and control systems.

Which standard applies to crane inspection?

Crane inspection and maintenance in Australia is carried out to AS 2550, supported by relevant NDT and structural standards.

Cranes & Lifting

Crane Inspection Guide

A practical guide to crane inspection requirements, intervals and what inspectors look for under AS 2550.

15 May 2026 2 min read

Crane Inspection Requirements

Cranes must be inspected and maintained to AS 2550, with routine, periodic and major inspections depending on type and duty. Inspection keeps cranes safe and legally operable.

What Inspectors Check

Crane inspection covers:

Structural welds and members
Hook, sheaves and load path
Pins, bushes and slew ring
Wire ropes and rigging
Safety and control systems

Related Services

NDT Australia provides these services Australia-wide. Get certified, mobile inspection with clear reporting and fast turnaround.

Crane Inspection Major Inspection UT Compliance Inspection

Frequently Asked Questions

Keep Reading

Cranes & LiftingCommon Crane Defects and How to Catch ThemFrom structural cracks to worn sheaves, these are the most common crane defects — and the inspection methods that detect them.Read Cranes & LiftingMajor Inspection ExplainedWhat is a major inspection, when is it required, and what does it involve? Here's the plain-English guide.Read Inspection ProcessHow to Prepare Equipment for InspectionA little preparation makes inspections faster and more effective. Here's how to get your equipment ready.Read